The tools in the Professional Terminal Release Tool Kit are made of steel & were designed especially for the professional technician.  The kit is packaged in a custom pouch and includes (3) tools for different sized wire & contacts:

This kit provides the technicians with an assortment of back probe pins which gives the technician access to the back probe circuit without any obstructions.  The new 490-M Back Probe Pins also have a longer pin to reach circuits that were previously unreachable.

The 490-M kit includes:
(10) Straight Pins
(5)   90 Degree Pins
(5)   45 Degree Pins

Sharp, small diameter probes slide along wire into the connector to back probe circuit.  Bent at 90 degrees with longer, more durable pins than the original 490 kit.  No need to disconnect the connector or terminal. 

The 490-90 Kit includes:
(20) 90 Degree Back Probe Pins in 5 different colors

M14 X 1.5

Fits: Audi, BMW, VW, Mercedes and Porsche

Vehicles with 14MM Wheel Lug Bolts

Allows tech to hang wheel and tire without having to balance wheel on lip of hub.

• 14mm Pins simply screw into wheel bolt hole
• Pins are made from high grade steel for strength
• Pins are Zinc plated for visibility and durability
• Keeps rotor aligned with hub
• Prevents wheel from falling causing damage
• 2 pins per pack

M12 X 1.5

Fits: Audi, BMW, VW, Mercedes and Porsche

Vehicles with 12MM Wheel Lug Bolts

Allows tech to hang wheel and tire without having to balance wheel on lip of hub.

·        12mm Pins simply screw into wheel bolt hole

·        Pins are made from high grade steel for strength

·        Pins are Zinc plated for visibility and durability

·        Keeps rotor aligned with hub

·        Prevents wheel from falling causing damage

2 pins per pack

Blasts away dirt and debris at a 90 degree angle. Wand reaches 24-inches between radiator and condensor, under mowing decks, etc. to clean away dirt and debris. Made of zinc-plated steel with adjustable valve assembly. Special tips deliver air or water at a 90 degree angle. Blow gun meets OSHA requirements for blasting away bugs, dirt and debris, and easily converts to a high pressure spray wand for finish cleaning. Also available is a 12-inch extension (Part No. 467E) to increase reach to 36 inches.

For use with THEXTON Part No. 467A
Cleaning Wand 12-inch extension to increase reach to 36-inches.

Reaches up to 32” to lower spare tire from undercarriage of Pickups, vans and SUV’s. Kit includes a hand crank and six different zinc-plated steel tools to fit most pickup, van and SUV type vehicles. No need to locate tools supplied by vehicle manufacturer, because the Spare Tire Removal Tool Kit contains all the tools you need in a heavy nylon pouch.