Hardened steel punch is 7 1/4” long with comfortable cushion grip. Rugged and durable, punches through 1/8” steel. Use as a center punch for starting drills, sheet metal scribe, lining up holes in moldings and more. Shipping Weight 0.30 lb.

Variable probe valve releases propane at suspected vacuum leak. Increased RPM verifies leak. Locates hard-to-find leaks. Aluminum probe shaft bends for access. Includes vertical hanger and four feet of propane hose. Shipping Weight 0.60 lb.

Heat-treated steel tool tightens belt on GM-type Saginaw pumps. Slips over bracket to eliminate damage to pump housing. Use with 1/2” drive ratchet or breaker bar. Improved design resists breakage. Shipping Weight 0.25 lb.

Attaches to steering wheel and depresses throttle pedal. Quickly adjusts RPM to desired setting. Saves time on air conditioning work, fuel injection cleaning, cylinder balance tests, tune-ups, etc. Shipping Weight 1.85 lbs.

For Ford/Mercury/Lincoln with Thick Film Ignition modules and 5.5mm hex bolt. 1/4” drive, 5.5mm socket reaches holddown bolts where a standard socket won't. 3/8” wrench also fits. Not for use as an impact socket. Shipping Weight 0.05 lb.

Prevents loss of small carburetor, FI, or transmission parts. Wire mesh with galvanized steel cover that slides tightly over basket. Includes hook for hanging basket in solution for soaking parts. Shipping Weight 0.25 lb.

Fits grease fittings in confined areas, such as lower ball joints. Special seal and slot in coupler housing provides 90 degree access. Fits all standard grease guns — can be used as general purpose grease coupler. Shipping Weight 0.10 lb.

1996 and up GM front wheel drive vehicles require this adapter when using Thexton’s Part No. 419 Engine Moving Tool. Adapters are installed between tool and front strut bracket. Safely holds engine in place. Shipping Weight 0.25 lb.

Fits GM front wheel drive vehicles with engine torque struts used on most transverse mounted engines. Replaces existing torque strut (dogbone) and allows engine to be tilted forward to access spark plugs, distributor, ignition coils, rack and pinion steering gear, power steering hoses, etc. Easy to install. Safely holds engine in place. Extra bolt holes provide fit on all vehicles. Includes No. 419A adapter. Shipping Weight 2.40 lbs.

Clamps to weak gas cylinder lifts to hold up hood or tailgate. Won’t damage cylinder rod. Eliminates clumsy sticks or props. Shipping Weight .25 lb.

Identifies bolts, fittings, pipe threads and spark plugs with US or metric threads. Aluminum gauges identify: 1) US threads from #5 to 3/4" and pitch of 10TPI to 44TPI; 2) Metric threads from 2.5 to 22mm and pitch of .45 to 2.5mm; 3) Pipe threads 1/16" to 1/2" with 14TPI to 27TPI; and 4) Spark plug threads 10 to 18mm. Shipping Weight .10 lb.

For installation of wires or cable through rubber grommets such as those used in firewall or vehicle door. Sharp punch easily pierces thickest grommets. Hole through handle and punch shaft allows feeding wire through tool and grommet. Use for installation of radios, alarm systems, cellular phones, heavy gauge wiring, etc. Stainless steel shaft. Vinyl tip cover. Shipping Weight 0.35 lb.

Removes transmission linkage using plastic bushings, from shift lever on: Ford: FMX, C-3, C-4, C-5, C-6, AOD and A4LD-1974 and up GM Trucks: 4x4 with 207 and 208 transfer case-1981 and up Jeep: 4x4 with 228 and 229 transfer case-1981 and up Tool separates linkage rod from plastic bushing in transmission lever. High strength steel is specially treated for wear and breakage resistance. Angled “pickle fork” design easily separates linkage. Allows access to hard to reach linkages on Chrysler/Jeep vehicles and confined areas on front wheel drive vehicles. Shipping Weight 1.55 lbs.

Fits most vehicles with door jam buzzer switch located by door hinges. Tool pushes on door jam switch to shut off buzzer. High tension spring for constant pressure. Bright orange warning flag. Shipping Weight 0.15 lb.

Three piece lubrication kit allows reaching zerks in the most confined areas ( i.e. lower ball joints on front wheel drive cars, inner tie rod ends, etc.). Use with any standard grease gun. Shipping Weight 0.25 lb. Kit Includes: No. 418 Right-Angle Grease Fitting Coupler, heavy-duty 12" flexible hose extension with 1/8" NPT fittings, and No.446 Quick change adapter.

Designed for domestics and imports with door buzzer located on post behind front door. Eliminates irritating door buzzer. Spring steel with suction cup. Orange warning flag. Shipping Weight 0.15 lb.

Makes changing grease couplers fast and easy. Allows using standard grease gun without changing coupler for every application. Made of high strength aluminum. Uses 1/8” male pipe nipple. Shipping Weight 0.10 lb.

Sold as a peg strip of 10 packages, with 4 Grip Collars per pack.  The Grip Collars are manufactured with an automotive chemical resistant compound.

Sold as a peg strip of 10 packages, with 4 Grip Collars per pack.  The Grip Collars are manufactured with an automotive chemical resistant compound.

Sold as a peg strip of 10 packages, with 4 Grip Collars per pack.  The Grip Collars are manufactured with an automotive chemical resistant compound.

New tool silences irritating warning alarm switch located in door latch assembly of late model domestics and imports. Picks up where Sanity Tools I and II left off. Tool slides into door latch opening and closes switch. Allows working on vehicle with door open and key in ignition or headlights on. Steel tool has vinyl protective boot to prevent scratching finish if door is accidentally closed. Also has highly visible orange warning flag.

Kit contains three sure ways to reduce irritation and aggravation in the shop. Door Buzzer Sanity Tools I, II and III (Part Nos. 442, 445 and 466) handle alarm switches located on A and B pillars as well as door latch assemblies.All three tools allow technician to shut off warning system alarm when working with key in ignition and door open. Tools I and II use a spring design with suction cup and stepped button to shut off switch located on A or B pillars. Tool III works on domestics and imports with the switch located in the door latch assembly.

Nine-inch extension reaches grease fittings in restricted or limited access areas. Molded handle provides leverage for attaching grease coupler and removing from difficult fittings. Lube Tube Kit includes Part No. 418 Right Angle Grease Coupler and a standard grease coupler. Standard zerk in handle fits all grease guns.

Tool has a 1/2” diameter stainless steel tube and hollow handle for heavy gauge wiring. Aids in installing radios, alarm systems, auxiliary lights, cell phones and more. Sharp punch pierces thickest grommets. Allows feeding wire through tool to other side of firewall or panel.

Includes Part No. 475 1/2” diameter Jumbo Wire Insertion Tool and Part No. 436 5/16” diameter Wire Insertion Tool. Stainless steel tube and hollow handle aid in installing radios, alarm systems, lights and more.

New tool uses air power to break loose frozen or rusted fasteners. Hardened steel body with 3/8” drive, adapter chuck and four screw bits. 3/8” drive allows using hex or specialized sockets to remove stubborn nuts and bolts.

Set includes 3-inch and 6-inch starters. Six-inch length is designed for coil-on plug applications and other engines with recessed spark plugs. The shorter version is for other applications where space is limited. Tools are made of flexible, heat-resistant plastic to reach into recessed areas or over, under and around hot manifolds. Shaft is stepped to grip insulator. Non-slip, black grip surface for sure handling.

Reaches up to 32” to lower spare tire from undercarriage of Pickups, vans and SUV’s. Kit includes a hand crank and six different zinc-plated steel tools to fit most pickup, van and SUV type vehicles. No need to locate tools supplied by vehicle manufacturer, because the Spare Tire Removal Tool Kit contains all the tools you need in a heavy nylon pouch.

M14 X 1.5

Fits: Audi, BMW, VW, Mercedes and Porsche

Vehicles with 14MM Wheel Lug Bolts

Allows tech to hang wheel and tire without having to balance wheel on lip of hub.

• 14mm Pins simply screw into wheel bolt hole
• Pins are made from high grade steel for strength
• Pins are Zinc plated for visibility and durability
• Keeps rotor aligned with hub
• Prevents wheel from falling causing damage
• 2 pins per pack

M12 X 1.5

Fits: Audi, BMW, VW, Mercedes and Porsche

Vehicles with 12MM Wheel Lug Bolts

Allows tech to hang wheel and tire without having to balance wheel on lip of hub.

·        12mm Pins simply screw into wheel bolt hole

·        Pins are made from high grade steel for strength

·        Pins are Zinc plated for visibility and durability

·        Keeps rotor aligned with hub

·        Prevents wheel from falling causing damage

2 pins per pack

 Instead of cluttering your toolbox with unused sizes of Deutsch Tools, now you can buy just the sizes you need. Tools fir Deutsch HD10, HD20 and HD30 Series connectors plus Deutsch Jiffy Splices. Deutsch wire terminals have a special security collar that the connector tabs lock against. Tools are designed to slide over the wire in the rear of the connector to release the locking tabs. Deutsch terminals and connectors are found on Chrysler, GM, AGCO, John Deere, Case, Babcat, Caterpillar, Harley Davidson, Mercury outboards, Kenworth, Peterbuilt, White and other HD applications.

3 per pack

Instead of cluttering your toolbox with unused sizes of Deutsch Tools, now you can buy just the sizes you need. Tools fir Deutsch HD10, HD20 and HD30 Series connectors plus Deutsch Jiffy Splices. Deutsch wire terminals have a special security collar that the connector tabs lock against. Tools are designed to slide over the wire in the rear of the connector to release the locking tabs. Deutsch terminals and connectors are found on Chrysler, GM, AGCO, John Deere, Case, Babcat, Caterpillar, Harley Davidson, Mercury outboards, Kenworth, Peterbuilt, White and other HD applications.

 Instead of cluttering your toolbox with unused sizes of Deutsch Tools, now you can buy just the sizes you need. Tools fir Deutsch HD10, HD20 and HD30 Series connectors plus Deutsch Jiffy Splices. Deutsch wire terminals have a special security collar that the connector tabs lock against. Tools are designed to slide over the wire in the rear of the connector to release the locking tabs. Deutsch terminals and connectors are found on Chrysler, GM, AGCO, John Deere, Case, Babcat, Caterpillar, Harley Davidson, Mercury outboards, Kenworth, Peterbuilt, White and other HD applications.

3 per pack